5 Signs You Need a Brake Repair from Your INFINITI Dealer

Do you suspect that your INFINITI’s brakes are failing? Visit your INFINITI dealer immediately to have them checked out and repaired. Faulty brakes can make it difficult to stop your vehicle in an emergency and lead to a fatal accident. Watch out for these telltale signs that you need brake repair.

1. Brake Light Is On

If the brake warning light or ABS light illuminates your INFINITI’s dashboard, you should get it checked out immediately. These lights indicate issues with the braking system that require prompt diagnosis. You could be dealing with worn brake pads and rotors, faulty ABS sensors, problems with wheel speed sensors, or even computer issues. The only way to be sure is to have our dealer’s technicians diagnose the system.

2. Grinding or Squealing Sounds

Do you hear high-pitched squeals or grinding sounds when braking? Squealing is caused by wear indicators on the brake pads alerting you that the pads are severely worn out. Grinding sounds occur due to metal-on-metal contact as the pads wear down completely. Driving with these noises causes further damage to the rotors and other components and can lead to costly repairs.

3. Poor Braking Response

Your INFINITI relies on the brakes to stop the vehicle when you press the brake pedal. If your vehicle is taking longer to stop or has a spongy brake pedal that presses close to the floor, there is a problem. You could be dealing with worn brake pads, rotors, calipers, or other components.

Worn braking components lose friction, so they are unable to grip effectively. When you press the brake pedal, it takes longer to slow down and stop due to less braking force being generated. Poor response could also be caused by leaks or air pockets in the brake fluid lines, so don’t take any chances if you notice this issue.

4. Vibrations When Braking

Strong vibrations in the brake pedal or steering wheel when braking signal warped brake rotors. The rotors are critical discs that brake pads press against to stop the wheels. If they are worn out, they may wobble as they spin, sending pulsating vibrations through the pedal and other components. Discs tend to wear due to age or exposure to heat, so replace them immediately to restore smooth braking.

5. The Car Jerks to One Side When Braking

Does your INFINITI pull to one side when braking? This is a sign that there is a worn brake caliper, stuck caliper piston, or damaged hose on one side. These defects reduce the braking force, so when you brake, the vehicle pulls to the side with more force. You need a diagnosis from a certified technician to pinpoint the defective component.

Get your brakes checked as soon as you notice any of the above signs to avoid compromising your safety. Contact Redwood City INFINITI in Redwood City, CA to schedule brake diagnosis and repair with our factory-trained technicians.

Tags: Brake Service, INFINITI Repair in Redwood City CA
Posted in Brake Repair, Redwood City INFINITI Service | No Comments »